DATSUN 510 & Z FRONT SUSPENSION

                                                                                                                                                                                  

 

204-1000     Camber plate, 6” offset.  Slots offset for increased caster, top of strut tower must be cut for

                     installation.  Includes (1) right hand and (1) left hand plate with (5) mounting holes each,

                    (2) sliders with 5/8” spherical bearing, (2) 2.5" diameter upper spring perches with needle

                     roller bearing, shock shaft to bearing adapter bushing, and all mounting hardware.                            $305.00

 

204-1001     Camber plate, 6” centered.  Slots centered for no caster change, to achieve maximum camber

                    the raised portion of the strut tower needs to be cut slightly.  Includes (2) plates with (3)

                    mounting holes each, (2) sliders with 5/8” spherical bearing, (2) 2.5” diameter upper spring

                    perches with needle roller bearing, shock shaft to bearing adapter bushing, and all mounting

                    hardware.                                                                                                                                               $305.00

 

204-1003     Camber plate, Datsun 240/260/280Z. Slots centered for no caster change, top of tower must

                    be cut for installation.  Includes (2) plates with (8) mounting holes each, (2) sliders with 5/8”

                    spherical bearing, (2) 2.5” diameter upper spring perches with needle roller bearing, shock

                    shaft to bearing adapter bushing, and all mounting hardware.                                                              $305.00

 

204-1017     Camber plate, Datsun 240,260, 280Z street prepared, front, biscuit style.  Mounts in stock location

                    with everything below the tower.  No cutting required.  Includes (2) mounting plates/sliders with

                    5/8” spherical bearing, upper spring perches for 2.5” diameter springs with needle roller bearing,

                    shock shaft to bearing adapter bushing, and all mounting hardware.                                                    $265.00

 

204-9017     Camber plate, Datsun 240,260, 280Z street prepared, rear, biscuit style. Mounts in stock location

                    with everything below the tower.  No cutting required.  Includes (2) mounting plates/sliders with

                    5/8” spherical bearing, upper spring perches for 2.5” diameter springs, shock shaft to bearing

                    adapter bushing, and all mounting hardware.                                                                                       $245.00

 

 

INDIVIDUAL CAMBER PLATE PARTS

 

 

201-1062     Camber plate slider with 5/8” spherical bearing                                                                                       $88.00

 

201-1250     Camber plate upper spring perch for 2.5” ID spring                                                                                $25.00

 

201-1625     Camber plate 5/8” spherical bearing                                                                                                       $28.00

 

201-1000     Camber plate mounting plate, 6” offset aluminum alloy, (5) mounting holes                                           $35.00

 

201-1001     Camber plate mounting plate, 6” centered aluminum alloy, (3) mounting holes                                      $35.00

 

201-1003     Camber plate mounting plate, Datsun Z aluminum alloy, (8) mounting holes                                         $35.00

 

201-1004     Camber plate mounting plate, 6” square steel universal, can be cut to fit then bolted or welded            $40.00

 

210-4000     Camber plate needle bearing kit for slotted type camber plates                                                              $20.00

 

 

 

​

214-1100     Aluminum threaded collar, 5” long with 2” ID for 2.5” coil over spring (2) weld rings for attaching

                    to strut tube.                                                                                                                                           $135.00

​

214-1101     Aluminum threaded collar, 5” long with 2” ID for 2.5” coil over spring (1) weld ring for attaching

                    to strut tube and still allowing removal.                                                                                                  $125.00

​

214-1225     Steel threaded collar, 6” long with 2” ID for 2.5” coil over spring.                                                          $150.00

 

214-1237     Steel threaded collar, 5” long with 2.18” ID for 2.5” coil over spring. For fitting Datsun 280Z                                                  strut.                                                                                                                                                             $165.00

 

                  Eibach 2.5” ID coil over springs, per pair                                                                                                 $150.00

 

                  Tokico shocks  Front adjustable, 510, per pair                                                                                        $375.00

                                          Front nonadjustable, 510, per pair                                                                                  $185.00

                                          Front adjustable, Datsun Z, per pair                                                                                $375.00

                                          Front nonadjustable, Datsun Z, per pair                                                                          $185.00

                  Koni shocks     Front single adjustable, 510 or Z, per pair                                                                       $490.00

                                          Front double adjustable, 510 nor Z, per pair                                                                   $780.00

                                          Rear single adjustable, steel bodied, 510, per pair                                                          $740.00

 

299-1015     Labor to shorten struts and install collars.  Per pair.                                                                              $110.00

 

299-1015-1  Labor to remove perch and install collars.  No strut shortening.  Per pair.                                              $80.00

 

299-1026     Labor to turn shocks to fit camber plate spherical bearing. Each                                                            $25.00

 

224-9510     Datsun 510/610 steering box brace.                                                                                                        $80.00

 

224-2100     Idler arm bushing, 510, 610, 710, 200SX                                                                                                $45.00

 

2241211      Steering arms, bump steered to correct geometry, 510, 610, 710, 200SX.  Must be used

                    with steering side rods.                                                                                                                          $245.00

 

224-1210     Steering side rods, Datsun 510                                                                                                             $225.00

 

224-1212     Steering side rods, Datsun Z                                                                                                                 $225.00

 

224-1200     Steering knuckle riser including bolts, Datsun 510, per pair.  Aluminum spacer used to correct

                    bumpsteer for street or race.  Mounts between steering arm and bottom of the strut. 

                    Corrects geometry changes when car is lowered.  Does not raise ride height.                                       $80.00

 

224-1201     Steering knuckle riser including bolts, Datsun Z, per pair. Aluminum spacer used to correct

                    bumpsteer for street or race.  Mounts between steering arm and bottom of the strut. 

                    Corrects geometry changes when car is lowered.  Does not raise ride height.                                       $80.00

 

224-1000     Front control arm bushing kit.  Spherical bearing and adapter bushings to replace stock

                    rubber bushings.  Datsun 510, stock bolt.                                                                                              $158.50

 

224-1001     Front control arm bushing kit.  Spherical bearing and adapter bushings to replace stock

                    rubber bushings.  Datsun 510, 5/8” bolt.                                                                                                $153.50

 

224-1002     Front control arm bushing kit.  Spherical bearing and adapter bushings to replace stock

                    rubber bushings.  Datsun Z, stock bolt.                                                                                                 $158.50

​

299-1006     Front cross member, Datsun 510.  Relocate control arm pick-up points, includes hardware.                                                 Core required                                                                                                                                         $250.00

​

299-1005     Front cross member, Datsun Z.  Relocate control arm pick-up points, includes hardware.                                                     Core required                                                                                                                                         $320.00

​

224-2002     T/C kit, Datsun 510, 610, 710, 200SX, and Z, nonadjustable, spherical bearing type. 

                     Requires welding for installation.                                                                                                          $125.00

​

224-2003     T/C kit Datsun 510, 610, 710, 200SX, and Z, adjustable, spherical bearing type. 

                     Requires turning the stock T/C rod and welding for installation.                                                           $185.00

​

284-1510     Front sway bar kit, Datsun 510, 1-1/8” diameter tubular with (4) holeadjustability.  Includes

                    sway bar, standoffs, pillow blocks, rod end links, and mounting hardware.  Requires welding

                    mounts to lower control arms.                                                                                                                $465.00

​

284-1240     Front sway bar kit, Datsun Z, 1-1/8” diameter tubular with (4) hole adjustability.  Includes

                    sway bar, standoffs, pillow blocks, rod end links and mounting hardware.                                            $465.00

​

​

Datsun 510 & Z Rear Suspension

​

​

234-1000     Rear cross member solid mount kit, Datsun 510/610                                                                              $65.00

​

234-1002     Rear diff solid mount kit, Datsun 510, 610, 240,260,280Z. 2.4” OD                                                        $50.00

​

234-1009     Rear diff solid mount kit, Datsun 510/610.  1.95” OD                                                                              $50.00

​

234-1003     Front diff solid mount, Datsun 240, 260, 280Z                                                                                        $75.00

​

224-1004     Rear control arm bushing kit.  Spherical bearing and adapter bushings to replace stock rubber

                    bushings.  Datsun 510, stock bolt.                                                                                                         $300.00

​

224-1005     Rear control arm bushing kit.  Spherical bearing and adapter bushing to replace stock rubber

                    bushings.  Datsun 510, 5/8” bolt.                                                                                                           $295.00

​

234-1824     Rear weight jacker, Datsun 510/610, for 2.5” ID or stock diameter spring                                            $195.00

​

234-1826     Rear lower spring perch kit, Datsun 510/610.  Use when using 2.5” ID coil over springs in the

                    stock location.  Weld in.                                                                                                                         $120.00

​

299-1004     Fully adjustable rear cross member.  Datsun 510/610.  Allows camber and toe adjustment. 

                    Includes 5/8” bolts, shims, and hardware. Core required.                                                                     $565.00

 

299-1004-1  If customer removes stock brackets.  Datsun 510/610.  Core required.                                                $465.00

 

299-1012     Enlarge exhaust hole                                                                                                                             $100.00

 

234-9001     Fully adjustable rear cross member kit.  Parts to make rear cross member fully adjustable.  

                    Only sold to customers who agree they have the ability to perform the fabrication necessary

                    to complete this.  No refunds.                                                                                                                $355.00

  

299-1003     Rear cross member street slot.  Allows camber adjustment to correct for increased camber

                    with a lowered street car.  Slotted and reinforced inner control arm mounting bracket.                        $255.00

 

284-2510     Rear sway bar kit. Datsun 510.  1” diameter tubular sway bar with splined ends, aluminum

                    arms, cowbells, endlinks, and hardware.  Requires welding for installation.                                          $475.00

 

284-2243     Rear sway bar kit. Datsun 240, 260, 280Z.  3/4” diameter, includes  new diff hanger plates,

                    endlinks, and hardware.  Requires welding mounts into the lower control arms for installation.            $435.00

​

284-2245     Rear sway bar kit. Datsun 240, 260, 280Z.  5/8” diameter, includes  new diff hanger plates,

                    endlinks, and hardware.  Requires welding mounts into the lower control arms for installation.            $435.00

​

 

Datsun 510 & Z Brake Components

 

 

460-9510     Datsun 510 pedal assembly.  Modify and reinforce stock pedal assembly to accept two master

                    cylinders and a balance bar to allow the front to rear brake balance to be adjusted.  Mounts in

                    stock location.  The firewall needs to be opened up for master cylinder clearance, and either a

                    plate needs to be welded in or a doubler plate can be made and installed between the firewall

                    and the master cylinders.  Includes modified pedal assembly, two master cylinders, and balance

                    bar.  Master cylinder size is determined by the brakes installed on the car.                                          $595.00

 

460-9240     Datsun Z pedal assembly.  Modify and reinforce stock pedal assembly to accept two master

                    cylinders and a balance bar to allow the front to rear brake balance to be adjusted.  Mounts in

                    stock location.  The firewall needs to be opened up for master cylinder clearance, and either a

                    plate needs to be welded in or a doubler plate can be made and installed between the firewall

                    and the master cylinders.  Includes modified pedal assembly, two master cylinders, and balance

                    bar.  Master cylinder size is determined by the brakes installed on the car.                                          $595.00

 

 

461-9510     Firewall reinforcement plate, Datsun 510                                                                                                $50.00

 

461-9240     Firewall reinforcement plate, Datsun Z                                                                                                    $50.00

 

72-508        Balance bar cable adjuster.  Allows balance bar to be adjusted by the                                                    $70.00

                   driver while belted into the seat.                                                                                                   

 

424-3511     Aluminum brake reservoir.  Datsun 510 remote mount.                                                                        $150.00

 

424-            Aluminum brake reservoir.  Datsun Z remote mount.                                                                             $150.00

 

 

 

The following brake kits are some of the more common we supply.  Because of the wide variety of possible

strut and hub combinations which can be fitted to these cars, as well as, the large number of possible rotor

and caliper applications, please contact us for other possible kits. 

 

401-0506     Front brake kit, Datsun 510.  Fits stock small spindle strut.  Includes10.25” dia. x .81” thk. vented

                    rotor, (4) piston Wilwood Dynalite calipers, aluminum rotor mounting hats, brackets, brake pads,

                    and hardware.  Fits 13” diameter wheels.                                                                                              $850.00

 

401-0510     Front brake kit, Datsun 510.  Fits stock small spindle strut.  Includes12.19” dia. x .81” thk. vented

                    rotor, (4) piston Wilwood Dynalite calipers, aluminum rotor mounting hats, brackets, brake pads,

                    and hardware.  Fits 15” diameter wheels.                                                                                              $850.00

 

401-8240     Front brake kit, Datsun Z.  Fits stock Datsun Z strut.  Includes 11.40” dia. x .81” thk. vented rotor,

                    (4) piston Wilwood Superlite calipers, aluminum rotor mounting hats, brake pads, and hardware. 

                    Caliper bollts directly to the stock strut ears.  Fits 14” diameter wheels.                                                $790.00

 

401-8280     Front brake kit, Datsun Z.  Fits stock Datsun Z strut.  Includes 12.19” dia. x .81” thk. vented rotor,

                    (4) piston Wilwood Superlite calipers, aluminum rotor mounting hats, brackets, brake pads, and

                    hardware.  Fits 15” diameter wheel.                                                                                                      $870.00

 

401-8282     Front brake kit, Datsun Z.  Fits stock Datsun Z strut.  Includes 12.19” dia. x 1.25” thk. vented rotor,

                    (4) piston Wilwood Superlite calipers, aluminum rotor mounting hats, brackets, brake pads, and

                    hardware. Fits 15” diameter wheel.                                                                                                       $885.00

 

401-9510     Rear brake kit, Datsun 510.  Includes 10.25” dia. x .39” thk. solid rotor, (2) piston Wilwood Dynalite

                    Single calipers, brackets, brake pads, and hardware.  Fits 13” diameter wheel.                                   $650.00

 

401-9511     Rear brake kit, Datsun 510.  Includes 11.40” dia. x .39” thk. solid rotor, (2) piston Wilwood Dynalite

                    Single calipers, brackets, brake pads, and hardware.  Fits 14” diameter wheel.                                   $650.00

 

401-9240     Rear brake kit, Datsun Z.  Includes 11.40” dia. x .39” thk. solid rotor, (2) piston Wilwood Dynalite

                    Single calipers, brackets, brake pads, and hardware.  Fits 14” diameter wheel.                                   $650.00

 

401-9280     Rear brake kit, Datsun Z.  Includes 11.40” dia. x .81” thk. vented rotor, (4) piston Wilwood Dynalite

                    calipers, aluminum rotor mounting hats, brackets, brake pads, and hardware.  Fits 14” diameter

                    wheel.                                                                                                                                                    $995.00

 

 

 

Datsun 510 & Z Engine and Driveline Components

 

 

139-1001     Competition oil pan, Datsun 510, with customer supplied core                                                            $1500.00

                    Competition oil pan, Datsun 510, without customer supplied core                                                       $1600.00

 

139-1006     Competition oil pan, Datsun Z, with customer supplied core                                                               $1600.00

                    Competition oil pan, Datsun Z, without customer supplied core                                                           $1700.00

 

120-1001     Camshaft spray bar kit, L-series 4 cylinder engine                                                                                $145.00

120-1002     Camshaft spray bar hose                                                                                                                        $40.00

120-1003     Camshaft spray bar only                                                                                                                          $98.00

120-             Camshaft spray bar bolt kit                                                                                                          

 

184-5101     L-series competition crank bolt and washer                                                                                            $35.00

 

120-1008     Oil pressure adjusting valve.  Allows oil pressure to be adjusted by simply turning an external

                     screw on the oil pump.                                                                                                                            $50.00

 

120-1006     Remote block.  BRE style.  Replaces the oil filter on the side of the L-series block to allow for the

                    use of an oil cooler.                                                                                                                                $150.00

 

120-1007     Remote oil filter mount.  Traco style.  RH inlet / LH outlet.                                                                      $95.00

 

120-4001     Offset starter nose.  Fits a Nissan gear reduction starter with two piece nose.  For use with a

                     flywheel with a 94 tooth ring gear.                                                                                                        $160.00

 

194-2000     Alternator adjusting strap.  For L-series engine.                                                                                      $45.00

 

150-1027     Aluminum flywheel, Datsun 510,  L-series (5) bolt crank, L16/L18. For use with 200mm clutch. 

                    Standard diameter ring gear.                                                                                                                 $425.00

 

150-1752     Aluminum flywheel.  Datsun 510, L-series (5) bolt crank.  For use with 7-1/4” metallic racing

                    clutch.  Standard diameter ring gear.                                                                                                     $375.00

 

150-1762     Aluminum flywheel.  Datsun 510 & Datsun Z, L-series (6) bolt crank.  For use with 7-1/4” metallic

                    racing clutch.  Standard diameter ring gear.                                                                                          $375.00

 

 

 

 

No Warranty Is Stated Or Implied For Street/Racing Parts. Prices Are Subject To Change Without Notice